Trauma control panel The list below will help you to understand the system settings scree. © Art By Paul 2000-2018    Power on/off To switch the control panel on simply press this button (quickly) once. And you do the same to turn it off again. Providing you have a leisure battery connected this panel should remember all your settings. Heating temperature When you press this button the display will display the last temperature you selected. To increase or lower the room temperature use the up/down arrows. You MUST always press the “SET” button afer any changes or the control panel will revert to the previous settings. So basically you use the up/down arrows to select 20c (example) then you press “SET”. Choose between gas/electric or even a bit of both As with most Combi systems you can choose various ways to heat the water and heating. This system lets you select the following choices GAS. = Selecting this will make the system use GAS Only to heat the vehicle and the hot water. (wild camping) ELECTRIC 4 amps = This tells the system to use up to 4 amps (1KWs) of (240v) electric only. ELECTRIC 8 amps = This tells the system to use up to 8 amps (2KWs) of (240v) electric only. ELECTRIC 4 amps +GAS = This tells the system to use up to 4 amps (1KWs) of (240v) electric and a bit of gas too. As a rule it tends to use electric to heat the water and gas for the heating to an extent. ELECTRIC 8 amps +GAS = This tells the system to use up to 8 amps (2KWs) of (240v) electric and a bit of gas too. As a rule it tends to use electric to heat the water and gas for the heating to an extent. Hot water Taping this button will display the hot water menu. You have 2 choices. Hot (60c) or off (0c). argent The small arrow shows you what you CAN select. The back bar shows what you HAVE selected